Experimental study of reflection coefficient and wave forces acting on perforated caisson     

Chen Xuefeng  Li Yucheng  Sun Dapeng  Chen Renyou 《海洋学报(英文版)》2002,21(3):451-460

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.  相似文献   

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover     

Xuefeng Chen  Yucheng Li  Bin Teng 《Coastal Engineering》2007

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.  相似文献   

大型桥梁钢沉井下沉过程局部冲刷研究     

高正荣  黄建维  赵晓冬 《海洋工程》2006,24(3):31-35

钢沉井下沉过程中局部冲刷的研究是同类桥墩设计和施工十分关心的重要课题,它对保证钢沉井安全有效施工、桥梁设计中施工期桥墩最大冲深、失稳和安全计算有重要参考价值。通过室内试验研究了钢沉井下沉过程中的局部冲刷机理和冲刷形态,探讨了桥墩下部钢沉井基础施工的相对高程对局部冲刷的变化规律,并将试验研究所获得的局部冲刷规律和影响因素,采用墩型系数方法引入局部冲刷计算中,给出了计算公式。研究成果补充了国家行业规范内容,对同类工程的设计、施工具有借鉴和指导意义。  相似文献   

Wave runup on a concentric twin perforated circular cylinder     

K. Vijayalakshmi  S. Neelamani  R. Sundaravadivelu  K. Murali 《Ocean Engineering》2007,34(2):327-336

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.  相似文献   

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate   总被引：1，自引：0，他引：1  

Yong Liu  Yu-cheng Li  Bin Teng 《Ocean Engineering》2007,34(17-18):2364-2373

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.  相似文献   

Wave reflection from partially perforated-wall caisson breakwater   总被引：2，自引：0，他引：2  

Kyung-Duck Suh  Jae Kil Park  Woo Sun Park   《Ocean Engineering》2006,33(2):264-280

In 1995, Suh and Park developed a numerical model that computes the reflection of regular waves from a fully perforated-wall caisson breakwater. This paper describes how to apply this model to a partially perforated-wall caisson and irregular waves. To examine the performance of the model, existing experimental data are used for regular waves, while a laboratory experiment is conducted in this study for irregular waves. The numerical model based on a linear wave theory tends to over-predict the reflection coefficient of regular waves as the wave nonlinearity increases, but such an over-prediction is not observed in the case of irregular waves. For both regular and irregular waves, the numerical model slightly over- and under-predicts the reflection coefficients at larger and smaller values, respectively, because the model neglects the evanescent waves near the breakwater.  相似文献   

Dynamic Response Behaviors of Upright Breakwaters Under Breaking Wave Impact   总被引：10，自引：0，他引：10  

Wang Yuanzhan  Chi Lihua  Pan Houzhi Associate Professor 《中国海洋工程》1996,(3)

- The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.  相似文献   

复合加载条件下吸力式沉箱基础承载特性数值分析   总被引：2，自引：0，他引：2  

王志云  王栋  栾茂田  范庆来  武科 《海洋工程》2007,25(2):52-56,71

吸力式沉箱基础的承载特性是海洋工程结构设施建造与设计中的一个关键问题。这种新型的深水海洋基础型式,通常承受竖向上拔荷载与水平荷载的共同作用,其工作性能与设计理论远远不能满足工程实践的需要。本文采用有限元分析方法对吸力式沉箱基础的极限承载特性进行数值计算。以大型通用有限元分析软件ABAQUS为平台,通过二次开发,数值实现了Swipe试验加载方法和固定位移比分析方法,针对不同的沉箱长径比、土的强度折减系数,探讨了沉箱基础在垂直上拔荷载和水平荷载单调联合作用下的极限承载力,通过对不同荷载组合的数值计算构造了复合加载条件下沉箱基础破坏包络面。  相似文献   

开孔率对明基床上开孔沉箱波浪反射系数影响的数值研究     

蔡郁  孙大鹏  赵沛泓  吴浩 《海洋工程》2018,36(5):30-37

开孔率是开孔沉箱波浪反射系数的重要影响因素,迄今为止关于开孔沉箱的物模试验研究成果(包括《防波堤设计与施工规范》)中,开孔率μ通常以线性关系反映在开孔沉箱波浪反射系数的计算关系式中,适用范围为0.2~0.4。但当μ0.2或μ0.4时,开孔率μ对波浪反射系数Kr的影响规律尚需进一步的研究探讨。现借助二维数值波浪水槽,在扩大了的开孔率取值范围内,模拟不规则波与可渗明基床上开孔沉箱的相互作用。结果表明:在0.2≤μ≤0.4的范围内,用线性关系描述开孔率μ对波浪反射系数Kr的影响是合适的;在μ0.4时,数模值和物模试验拟合的经验关系式的趋势是一致的;在μ0.2时,开孔沉箱反射系数K_r随开孔率μ的减小而增大,用物模试验拟合的经验关系式及《防波堤设计与施工规范》中计算公式的线性关系来描述开孔率μ对反射系数K_r的影响是不恰当的。研究成果对开孔沉箱消浪机理的深入认识和开孔沉箱结构的优化设计具有重要意义。  相似文献   

Incremental elastoplastic FEM for simulating the deformation process of suction caissons subjected to cyclic loads in soft clays     

《Applied Ocean Research》2016

This paper presents an incremental elastoplastic finite element method (FEM) to simulate the undrained deformation process of suction caisson foundations subjected to cyclic loads in soft clays. The method is developed by encoding the total-stress-based bounding surface model proposed by the authors in the ABAQUS software package. According to the model characteristics, elastoplastic stress states associated with the incremental strains of each iteration are determined using the sub-incremental explicit Euler algorithm, and the state parameters describing the cyclic accumulative rates of strains are updated by setting state variables during the calculations. The radial fallback method is also proposed to modify the stress states outside the bounding surface to the surface during determination of the elastoplastic stress states. The stress reversals of soil elements are judged by the angle between the incremental deviatoric stress and the exterior normal vector at the image stress point on the bounding surface to update the mapping centre and state variables during cyclic loading. To assess the general validity of the method, the reduced scale model tests and centrifuge tests of suction caissons subjected to cyclic loads are simulated using the method. Predictions are in relative good agreement with test results. Compared with the limit equilibrium and quasi-static methods, the method can not only determine the cyclic bearing capacity, but can also analyse the deformation process and the failure mechanisms of suction caisson under cyclic loads in soft clays.  相似文献